Gabion or gabion net material: 
 1, gabion or gabion stone cage net and net net or gabion revetment is handled by a special anti-corrosion of low carbon steel wire woven by machine composed of hexagonal steel wire twisted together, meet the engineering requirements made in the factory network box or slope protection structure, which has more than EN10223 ~ 3 standard cage as described in the mechanical properties. At the construction site filled with gabion stone for construction such as retaining wall, embankment protection and other agencies. Its structure has flexibility, water permeability and integrity and so on. 
 2, where Gore-plated steel wire thickness (5% aluminum-zinc alloy + REE) plastic covered corrosion protection, coating adhesion requirements: when the wire 4 times around the wire with a diameter of mandrel 6 weeks, the friction wire with your fingers, it will not peel or crack, in line with EN10223 ~ 3 standard; 
 Specifications: Gabion retaining wall and slope protection structures are labeled in accordance with construction plans, the wire cage gabion retaining wall should be properly arranged shelves, wire stone cage gabion slope protection should be arranged two-barrier structure of the interval 
 Mesh Model: Gabion retaining wall using 80mm × 100mm, D = 80mm. Net surface tensile strength of not less than 50KN / m; gabion revetment using 60mm × 80mm, D = 60mm; mesh tensile strength of not less than 35KN / m. 
 Wire diameter: Gabion retaining wall: mesh 2.7mm; edge wire 3.4mm, ligation 2.0mm. Gabion revetment: mesh 2.0mm; edge wire 2.7mm, ligation 2.0mm. 
 Tensile strength: 350 ~ 500MPa; without stretching the wire elongation is not less than 12% (after wire drawing processing of the finished product can not be less than 7% elongation) in line with EN10223 ~ 3 standard. 
 3, flange requirements: mesh with cutting edge after the end of the wire connection at the end of the entire structure of the weak links, in order to strengthen the network end of the wire surface and the edge strength of the connections; 
 4, twisted side requirements: must be used with steel wire mesh material, like steel, to ensure the connection strength to be in accordance with 10 ~ 15cm intervals alternating single-stranded circles; 
 5, wall to strengthen Zhu requirements: In order to avoid the panel pressure bulge, near the outer side of each gabion reinforcement are required to set, per square meter of panel evenly arranged 4; 
 6, gabion or gabion network installed at the factory under the guidance. 
 7, gabion or gabion filler network can be stone or gravel. Fill stone should be homogeneous, without cracks, no morals. Filler particle size should be controlled within 15 to 25 cm diameter of more than 80%, the remaining use of well-graded gravel filling, stuffing and requires not less than 1.8 weight cages tons / cubic meter. 
 8, gabion or gabion net construction should first start from both sides of the river, the river slope built bottom-up base. Finished gabion or gabion network design should be in place first and then fill the stone, gabion or gabion stone network in the process of handling and filling must be handled with care to not damage the gabion net surface corrosion of aluminum zinc coated steel wire layer. Should be placed when the facade of stone and assembled flat and beautiful.